There are tips for using & storing CTP plates in summer!

With low-cost, truly environmentally friendly performance advantages, CTP plates continue to be favored by customers.

With low-cost, truly environmentally friendly performance advantages,

CTP plates continue to be favored by customers.

Then its storage and use operations,

Do you really understand?

Especially in the coming rainy season and hot summer,

The storage and use of CTP plates can be said to be very knowledgeable!

Summer is coming-CTP plate storage, please pay attention↓↓↓

CTP plates are sensitive to temperature and humidity. Be sure to pay attention to the high temperature and high humidity environment in summer. They should be stored in a dry and cool air-conditioned room or warehouse at a temperature of 10°C-27°C and a humidity of 30%-70%.

Keep the plates in the unopened box flat, avoid stacking heavy pressure, and avoid direct sunlight or rain erosion on rainy days.

When transporting the plates, handle them with care to prevent collision, bending and deformation.

If you do not go to work on weekends and holidays, you should avoid turning off the air conditioning in the CTP prepress room and plate warehouse for a long time.

Arrange the inventory reasonably, don't stock up too much, use it as soon as possible, to avoid the susceptibility to some factors that will reduce the tolerance of the version after a long time.

It is worth mentioning that during the rainy season, the humidity in the air is relatively high. The plate room personnel should pay attention to the environmental changes of the plate placement site. If the plate liner with higher humidity will increase the probability of the problem of the automatic paper removal unit, good temperature and humidity control is the basic element to ensure normal plate making. Although storage is important, what are the matters needing attention during the use of CTP plates in summer?

Summer is coming-CTP plate storage, please pay attention↓↓↓

In the process of plate taking and plate making, it is recommended to wear cotton fine-sand gloves to avoid direct contact with the plate with your hands to leave fingerprints, and avoid sweat, saliva, water droplets, water mist, etc. from contaminating the plate.

Every time you take out the publication material from the box, take it out together with the backing paper on it, taking care to avoid scratches.

After the unexposed plate is opened, it should not be exposed to sunlight and white light for a long time, otherwise it is prone to fog and performance degradation.

The exposed plate should not be placed face-to-face without a backing paper for a long time (short-term is OK), face-to-face for a long time must be separated by a backing paper, and avoid direct sunlight or natural light.

The exposed plate should be protected by a backing paper on the front as much as possible. Do not remove the backing paper too early. It is better to keep the backing paper before the printing press is loaded. Be careful not to be scratched and rubbed on the front side, including the friction between the back of the plate and the front of the plate, the scraping of the dry ink on the upper plate guide roller, etc., to avoid scratches.

If the plate needs to be placed for a long time before printing on the machine, it is recommended to store it in a light-proof and moisture-proof sealed package under the recommended storage conditions to avoid high temperature and high humidity storage.

When the unused plate material is not used temporarily after opening, the plate box should be sealed and wrapped to prevent light and moisture to prevent the plate material from being exposed or affected by moisture for next use.

The scorching sun is scorching summer,

The rainy season will follow.

The use of plates must be cautious,

Storage issues are also important.

Environmental changes require attention,

Temperature and humidity control should be in place.

Pay attention to the details,

Only by ensuring quality and quantity can increase efficiency!

As we all know, the storage and use of CTP plates are particularly important to the prepress and printing process, which directly affects the quality of printing and the economic benefits of enterprises. Therefore, in the above precautions, you must do your homework!

Contact us to discuss your requirements of Air Driven Winch, Anchor Winch for Sale, European Electric Rope Hoist. Our experienced sales team can help you identify the options that best suit your needs.