So, you have decided to get truck-mounted water drilling equipment. The next step is getting the best water drilling truck for sale. Here are some of the tips that will help you to get the best truck.
You will get efficient and thoughtful service from TongShun.
Once you recognize the size of the drilling rig that you'll tow, determine what proportion it weighs, and make certain to incorporate the load of the trailer, too. This information will assist you in choosing from a light-duty and heavy-duty truck.
In most cases, drilling truck manufacturers rated trucks by their payloads: half-ton, 3/4-ton, and so on. Now, it's more common to hear about trucks divided into light-duty, medium-duty, and heavy-duty categories and identified by numbers like , , and or 150, 250, and 350.
Properly sizing the truck is vital. If you skimp on power, the truck may need trouble hauling your water drilling rig.
Similarly, if you decide on bigger drilling trucks, it'll cost more to get and refill. Plus, you will have a harder time fitting into parking lots or tight driveways.
Most water drilling truck experts will suggest slightly overestimating your requirements. A simple rule of thumb is to buy at least 10% more capacity than you would like.
When buying a water drilling truck, it is vital to consider the issue of the terrain. These are basically the kinds of roads where you will be driving the truck.
All types of roads can be used to transport the drill rig and other equipment. However, we have seen cases where water drillers preparing a path or pull the truck by dozers until it finally reaches the water drilling site.
The truck selected must be selected to be suitable in a particular terrain. You don't want to buy a truck that will always stall on the way due to bad terrain, or where you will be forced to remove the drill rig from the truck since it is not capable of reaching the destination.
The simplest way of solving this problem is knowing your region. Different parts of the world tend to have different levels of transport infrastructure.
In Europe and North America, the roads are smooth, and choosing a drill truck won't be a complicated process that will give you a headache.
This is unlike in developing countries that tend to have poor infrastructure. In mining areas, deep within the jungle, the truck selected must be ready to drive on all kinds of terrains, unpaved roads, and steep slopes. Therefore, many water drilling companies tend to purchase the entire package of a drill rig, trailer, and off-road truck.
The truck usually has storage for spare parts and tooling and carries water for drilling. This makes them self-supporting.
If circumstances are really challenging, we select a truck that carries the drilling rig directly on its back, so there's no need for a trailer, which could stop and go smoothly.
It is vital to consider the truck's make and model on which to mount the water drilling rig. Some of the key factors that you should prioritize include standard, reliability, and durability of the truck, especially its ability to perform in harsh working environments where it's going to encounter high temperatures and battle with sand and mud elements.
In-country support is additionally a really important aspect. Many large water well drilling rigs sold to Africa are mounted on 6×6 trucks, not only for their longevity and reliability but because they're well supported within the region.
A Power take-Off (PTO) drive from the truck to power the machine is recommended. This feature saves on weight, costs, and space of a deck engine, comes with the newest emissions, and just the truck engine requires less maintenance.
But it's important to understand the complete application of drilling, local roads, off-road conditions, and the logistics between drilling projects.
A trailer-mounted water drill rig is usually bigger than a crawler-mounted rig with equivalent drilling capabilities and options. For real confined water drilling sites, the truck will be quite hectic driving to the borehole location.
If you've determined there are no glaring problems with why the truck has come onto the market in the first place, then you'll want to try to exercise your due diligence. Inspect the truck's maintenance records.
Has the truck received regular tune-ups or had any of its original components replaced? Having a far better idea of the truck's general history can help prepare you for what's to return do you have to purchase it.
In addition to maintenance history, you'll want to have a sneak peek specifically at the basic drilling truck care records also. If oil changes haven't been performed consistently throughout the truck's lifetime, it could indicate the potential for engine problems within the future.
If there are no maintenance and car care records in the least or sporadic records, take caution. It could indicate poor maintenance, which there's a possible hidden problem. Otherwise, ask the dealer if anything is missing or if they need additional insight into the truck's past.
So, between a trailer-mounted core drilling rig and a crawler mounted water well drilling rig, which one should I choose?
This is a question that you are likely to ask when buying portable water drilling rigs for sale.
One of the reasons as to why truck-mounted rig is preferred is for fast mobilization between the water drilling sites. Transport is flexible.
For the trailer-mounted, there's always an external truck needed. If there's no room for the transport truck to parked, it must be left elsewhere.
The truck-mounted rig will bring what he needs and may be used instantly. On smaller or squeezed sites, a crawler is preferred, thanks to the portability. Other advantages are cheap haul and cover a small surface area.
The disadvantage of a truck-mounted water well drilling rig is the driller may also have to double up as a driver.
Therefore, they require a driver's license and sometimes special permits or certificates. After an extended day of drilling, the crew needs rest before an enormous haul is often made. The mobilization and flexibility benefits will thereby be less applicable.
Another advantage of a truck-mounted water well drilling rig is capacity. This is usually the case if you buy a large truck for a water drilling rig. All the other components and accessories of the water well drilling rig, such as a heavy-duty mud pump, air compressor, and heavy-duty winch, can fit in the truck.
This feature so makes the users less dependable on external support and eliminates the need for extra vehicles for the ancillaries, therefore keeping costs down. However, you may not enjoy this benefit if you use a small truck mounted well drilling rig.
So which one should I choose between the two?
Whether a truck-mounted water well rig or a crawler-mounted rig is that the best-suited option for a project or not really comes right down to the customer's logistical and operational needs and conditions at the water well site that should be drilled.
The truck-mounted option is mostly the best option when drilling is required in remote locations, distant from infrastructure, to supply mobility and more flexibility without extra haulage. Otherwise, you may consider a crawler-mounted drilling rig.
Which is the best truck mounted water drilling rig for sale? Like any other valuable commodity, you would like to end up with a drilling rig that will deliver the best results.
One of the most important things that you should look at when buying a trailer-mounted drill rig is the construction.
Drills from different manufacturers often appear quite similar, but a better look will help determine if a unit is made to last. Some manufacturers entice customers with low prices of the drilling rigs without revealing the quality.
When calculating ROI, you should always remember that low-quality drills typically have shorter service lives and almost no resale value compared to higher quality trailer mounted water drilling rigs for sale.
The company is the world’s best Trailer-mounted drilling rigs supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Look for heavy-duty welded steel frames and thick drill pipes, for instance, to make sure the drill can withstand challenging conditions.
Some manufacturers construct drilling rigs using thin steel. This will cause the frame to bend or twist while driving or prematurely wear thanks to corrosion in hot, humid climates.
It would be best if you also considered trailer-mounted drilling rigs that incorporate features to simplify maintenance make it easy for crews to increase service life. For instance, An easily accessible adjustment screw and locking nut minimize downtime when removing slack from the drive chain.
Conveniently located greasing points also save a significant amount of your time during routine greasing and maintenance checks. If appropriately maintained, a top-quality drill can last for many years.
Another vital factor that you should consider is the drilling rig manufacturer's support. The manufacturer should provide the trailer-mounted drill rig supplies in good time whenever you need them.
The worst situation that a drill crew can think of is seeing a project stalling with nobody to back them up. Search for trailer-mounted drilling rig manufacturers that provide training manuals, video, and 24/7 technical support.
Some manufacturers go thus far on offer training sessions at their facilities, which may be the right way for inexperienced drillers to realize hands-on experience before beginning a project.
Additionally, remember that even the best truck mounted water drilling rig will need replacement parts. To save on the downtime, choose a manufacturer that keeps replacement parts available and offers fast delivery.
To discover more about the options for transporting drill rigs to operating sites GDI spoke to Dando Drilling's Ian Smith and Rutger van Goethem of Eijkelkamp SonicSampDrill.
What are the minimum requirements for towing a drill rig and do these vary depending on the size and type of rig being towed?
Van Goethem explains: "The requirements vary. We have clients throughout the world using rigs transported on trailers. A (dirt) road can usually be used to transport the drilling rig and other equipment. We have also seen clients preparing a path or pull the truck by dozers to make sure the drill gets to the job site.
The truck selected needs to be suited for the type of terrain. In Europe and North America, the roads are smooth and do not require a lot of special solutions. In mining areas, deep in the jungle, the truck selected needs to be able to drive on all terrain and steep slopes. Therefore, a lot of our mining clients purchase the complete package of drilling rig, trailer and off-road truck. The truck usually has storage for spare parts and tooling and carries water for drilling. This makes them self-supporting.
If circumstances are really challenging, we select a truck that carries the drill rig directly on its back so there is no need for a trailer, which might get stuck easily."
Smith points out that the requirements can change depending on where in the word the rig will be used: "The requirements for a trailer mounted rig are that it complies with the relevant legislation in the country of use, that it is fit for use and has the required safety features. Additional important requirements are stability and manoeuvrability when being transported with good weight distribution and a low centre of gravity, which enables easier positioning for drilling."
"Dando has also introduced its new Dando Duke cable percussion rig, which is mounted on a heavy-duty, twin-axle trailer with built-in road lights. The rig can be towed behind a regular pickup truck or appropriate van, with 3,000kg or greater tow capacity, for ease of transportation between drill sites."
What do you look for when considering using a truck to mount a drill rig on?
"When considering the make and model of truck on which to mount its rigs, Dando places the utmost importance on the quality, reliability and longevity of the vehicle, especially its ability to perform in harsh working environments where it may encounter high temperatures and battle with elements such as sand and dust," says Smith.
He continues: "In-country support is also a very important aspect. Many of Dando's large water well drilling rigs sold to Africa are mounted on Iveco Trakker 6x6 trucks, not just for their longevity and reliability, but because they are well supported in the region."
"At Eijkelkamp SonicSampDrill we always ask ourselves, will a truck be the best-suited solution for a client. A PTO drive from the truck to power the hydraulic system is recommended. This option saves on weight, costs and space of a deck engine, comes with the latest emissions and just the truck engine requires less maintenance. But it is important to know the full application of drilling, local roads as well as off-road conditions and the logistics between drilling projects. A truck-mounted rig is generally bigger than a crawler mounted rig with the same drilling capabilities and options. For real confined job sites the truck will bring challenges driving to the borehole location. A decision can also be made due to shipping possibilities. RORO shipment is more expensive and it makes clients choose crawler mounted rigs in some cases," notes van Goethem.
"All the rigs supplied are with off-road capabilities. The advantage of a truck-mounted drill is that as soon as the borehole is ready the client can easily move to the next job. Time is not lost loading the equipment or waiting for the transport firm to arrive.
"As mentioned above the terrain capabilities are important. If there is a lot of soft and slippery material at the surface, or there are a lot of steep slopes to be travelled, it is not easy to drive in there with a truck. A crawler mounted rig will make more sense in this case."
Which makes and models of truck do you prefer as rig carrying vehicles?
"Dando mounts its rigs to trucks which are known for their durability and support in the destination country. For these reasons, Watertec 12.8, 24 and 40 customers in Africa often choose the IVECO Trakker 6x6 trucks as their preferred chassis," says Smith. However, he then notes that "Dando can offer its rigs mounted on any brand of truck specified by the customer."
Eijkelkamp SonicSampDrill tries to use trucks preferred by its clients. Van Goethem says: "The major truck manufacturers will have a model that will work as a carrier for the drill rig so, within reason, any make or model of truck can be used. The frame of the drilling rig is custom made to fit the truck. In most cases, the client selects the truck according to the spec of the drill and supplies it for production. When a client wants a turnkey solution we will help to find the right configuration. There is a large Mercedes Benz dealer close to our office that makes communication for us easier. We have been using several Mercedes Benz Unimog and Arocs 4x4, 6x6 and 8x8 trucks."
While Dando favours IVECO vehicles, Smith acknowledges that other vehicles may be better suited in some situations and to accommodate this Dando also provides the customer with the option of acquiring the rig without a carrier and mounting it locally on to a truck of their own choice. He notes, however, that "it is important that the truck acquired by the customer meets specific requirements provided in advance by Dando."
An example of this type of situation given by Smith is the Watertec which was supplied to the Department of Geology in Vanuatu to provide water to the local communities. It was shipped on a 20ft flat rack, without a carrier vehicle and then mounted on a four-wheel drive truck supplied locally in Port Vila.
What are the advantages/disadvantages of truck-mounted rigs, as opposed to crawler-mounted rigs?
The truck-mounted rig is preferred for fast mobilisation between job sites. There is flexibility on transport. If it needs to go it puts the mast down and drivers away. For track mounted rigs there is always an external truck needed. If there is no room for the transport truck to be parked it needs to be stored somewhere else. The truck-mounted rig will bring what he needs and can be used instantly. On smaller sites, a crawler is preferred due to the flexibility. Other advantages are cheap haul and a low footprint.
The disadvantage of a truck mounted rig will be that the driller or helper needs to be the driver as well. Therefore, they need a truck driver license and sometimes special permits or certificates. After a long day of drilling, the crew needs some rest before a big haul can be made. The mobilisation benefits will thereby be less applicable.
"Whether a truck-mounted rig is the most suitable option for a project or not, really comes down to the logistical and operational needs of the customer and conditions at the drill site," says Smith. "The truck-mounted option is particularly suited when drilling is required in remote locations, far away from infrastructure, to provide mobility and more flexibility without the need for additional haulage."
Another advantage of mounting a Dando rig, especially a larger one, on a truck is that all the major components can be mounted onboard too e.g. heavy-duty mud pump, powerful air compressor and heavy-duty winch. Doing so makes the users less dependent on local support and eliminates the requirement for additional vehicles for the ancillaries, therefore keeping costs down.
An example of how this working in the filed can be seen with a Dando customer in Pakistan using a truck-mounted Mintec 18 on a job outside a small town in western Punjab near the mountainous Rakhi area. The rig was used within a large area of exploration with reasonable road connections, yet far away from the nearest big town or city, being mounted on a truck made it easy to move the rig over long distances.
However, Smith also notes "the truck-mounted option may not be suitable for a project when there is limited access to the drill site and ground conditions are challenging, for example having to travel through tight spaces or across difficult terrain." He then gives the example of a Vale, the mining company that, in , acquired two track mounted Jackal s for working in dense equatorial jungle located on a steep mountainside. The operator had to be able to easily manoeuvre the rig and equipment through thick jungle foliage, trees and muddy ground conditions. In a situation like that, a truck mounted rig would not be to access the site. However, the compact design of Dando's smaller track mounted rigs also allows them to fit within a container for easy and cost-effective transit.
What is the largest rig that can be towed behind a vehicle or be mounted on a truck?
"Dando," says Smith, "offers the trailer mounted and truck mounted option for all its drilling rigs from 4 to 40t pullback capacity."
Whether it is towed behind or mounted on a truck the LRS FS250 LargeRotoSonic is the largest rig in the Eijkelkamp SonicSampDrill line-up. Weight and size will depend a lot on chosen options.
If you want to learn more, please visit our website Water Well Drill Pipe.