What is the Advantage and Disadvantage of Conveyor Drive Drums

Drive types

The right drive for your project

CHENGGANG Product Page

Please feel free to contact us with any questions you may have about our service portfolio or your orders. 

Comparison of belt conveyor Drive Methods

1. Electric roller

Electric drums are divided into built-in electric drums and external electric drums. The main difference between them is that the motor of the built-in electric drum is installed inside the drum, while the motor of the external electric drum is installed outside the drum and is rigidly connected to the drum.

The built-in electric drum has poor heat dissipation because the motor is installed inside the drum. It is generally used on belt conveyors with a power of less than 30kw and a length of less than 150m. Because the motor is installed outside the drum, the external electric drum has better heat dissipation. It is generally used on belt conveyors with a power of less than 45kw and a length of less than 150m.

Advantages: compact structure, low maintenance costs, high reliability, the driving device and the transmission roller are integrated into one.

Disadvantages: Poor soft start performance, large impact on the power grid when the motor starts. The reliability is worse than the Y-type motor + coupling + reducer drive method.

2. Poor driving mode of Y-type motor + coupling + reducer

For more Conveyor Drive Drumsinformation, please contact us. We will provide professional answers.

Advantages: simple structure, small maintenance workload, low maintenance costs and high reliability.
Disadvantages: Poor soft start performance, large impact on the power grid when the motor starts. Generally used on belt conveyors with a power of less than 45kw and a length of less than 150m.

3. Y-type motor + torque-limiting hydraulic coupling + reducer

It is a widely used driving device on belt conveyors. It is generally used on belt conveyors with a single machine power of less than 630kw and a length of less than m.
The torque-limiting hydraulic coupling is divided into a torque-limiting hydraulic coupling with a rear auxiliary chamber and a torque-limiting hydraulic coupling without a rear auxiliary chamber. Since the hydraulic oil slowly enters the working chamber of the hydraulic coupling from the rear auxiliary chamber through the throttle hole when the motor is started, its starting performance is better than that of the latter.

1) If you choose one with a rear auxiliary chamber, when there are two models of hydraulic couplings that can meet the transmission power, because this type of hydraulic coupling takes a long time to start and generates a lot of heat, the larger model should be given priority. Force coupling.

2) If you choose one without a rear auxiliary chamber, when there are two models of hydraulic coupling that can meet the transmission power, because this type of hydraulic coupling has a shorter start-up time and a smaller calorific value, the smaller one should be given priority. Model fluid coupling.

3) For belt conveyors driven by multiple motors, if this drive method is selected, it is recommended that the hydraulic coupling be a torque-limiting hydraulic coupling with a rear auxiliary chamber.

Advantages: high cost performance, simple and compact structure, small maintenance workload, low repair costs, protection of motor overload, ability to balance motor power when driven by multiple motors, delay start in separate units, reducing the impact on the power grid when the belt conveyor starts impact, high reliability and low price, it is the preferred driving method for belt conveyors with a length less than m.

Disadvantages: The soft start performance is poor, and it is not suitable for downward transport belt conveyors and belt conveyors that require speed regulation function.

If you are looking for more details, kindly visit Pulley Manufacturer.

4. Y-type motor + speed-adjustable hydraulic coupling + reducer