The PRO-8 is a commercial ozone generator designed for use in commercial applications or wherever high ozone output is needed to reduce odors, mold, mildew, and bacteria.
If you want to learn more, please visit our website car ozonizer supplier.
It is our most powerful machine with an ozone output of up to 8000 mgph. (8 Grams per hr.) The PRO-8's high output gets the job done quickly. It is an excellent choice for mold remediation contractors and auto detailers. It has a built in hour meter for use by equipment rental retailers.It can deodorize an automobile in as little as 15 to 20 minutes because, it is 4 times as powerful as our FM1 & Pro-4.
It is an excellent choice for mold remediation contractors, water and fire clean-up crews, and equipment rental retailers.
When mold and mildew gets really severe in a building, the only recourse is to have the mold-laden material removed and hauled away.
Our machines can be a huge help, prior to, during and after the reconstruction. They can be used in the building to reduce airborne mold spores as well as the mold attached to the surface of material. These spores can enter the lungs and sinuses creating major health problems.
Running this machine over night, prior to the remediation, allows residents to temporarily occupy the building to work or remove furniture and personal belongings while the airborne mold is at reduced levels.
Ozone is a colorless gas with a distinct pungent odor.
It is a molecule made up of 3 atoms of oxygen. Interestingly, ozone occurs quite readily in nature, in the upper atmosphere protecting us from harmful UV rays, at the beach, in the forest, or near waterfalls. In fact, the odor of fresh spring rain following a thunderstorm comes from nature's creation of ozone. Since ozone is the second most powerful disinfectant, 3000 times that of chlorine; it can easily destroy bacteria, viruses, mold, mildew, and odors.For continuous operation, turn the timer knob counter clockwise to the Hold position.
For timed operation, turn the dial clockwise to select up to 12 hours of run time. Turn on the power with the large brown knob and adjust the output from 500 to 8000 milligrams per hour. At the end of the elapsed time, the ozone will shut off but the fan will remain running to help the ozone dissipate and turn back into oxygen. The fan will stop when the power is turned off. If stubborn odors persist, repeat the process.
Since ozone is the second most powerful sterilant in existence, it can easily destroy bacteria, viruses, mold, mildew, and odors.
Two input filters are supplied with every unit.
The ceramic plates inside the ozone generator should be cleaned with soap and water whenever there is a noticeable drop in ozone output. The housing is made completely from stainless steel for maximum durability.Specifications:
• Case Construction:
Stainless Steel• Coverage:
10,000 sq. ft for odors, 2000 sq.ft. for mold• Electrical:
120 V AC, 1200 watts, 3 Amp Fused• Ozone Output:
Adjusts from 500 to 8000 milligrams per hour•
Timer Settings: Hold ( for continuous operation) or timed from 15 min. to 12 hours• Hour Meter:
Registers usage up to 99,999 hours• Dimensions:
11" L x 15" W x 10" H• Weight:
25 lbs.Are you interested in learning more about ozone generator for sale factories? Contact us today to secure an expert consultation!
***Shipping is set at a flat rate - if you would like to order this with expedited shipping (Next Day Air, 2-Day Air, or 3-Day Air) call 724-325-0008 and we can get you the expedited shipping cost. If you select an expedited shipping option and check out online, we will call you with the additional shipping cost.
“
Does not meet California air cleaner regulation requirements (AB2276): Cannot be shipped to California.
”
It is our most powerful machine with an ozone output of up to 8000 mgph. (8 Grams per hr.) The PRO-8's high output gets the job done quickly. It is an excellent choice for mold remediation contractors and auto detailers. It has a built in hour meter for use by equipment rental retailers.Our machines can be a huge help, prior to, during and after the reconstruction. They can be used in the building to reduce airborne mold spores as well as the mold attached to the surface of material. These spores can enter the lungs and sinuses creating major health problems.Once all of the debrie is removed, it can help make the air safer for workers to occupy the building, and as the last step in the clean up process to help insure the building passes final air quality inspection.It is a molecule made up of 3 atoms of oxygen. Interestingly, ozone occurs quite readily in nature, in the upper atmosphere protecting us from harmful UV rays, at the beach, in the forest, or near waterfalls. In fact, the odor of fresh spring rain following a thunderstorm comes from nature's creation of ozone. Since ozone is the second most powerful disinfectant, 3000 times that of chlorine; it can easily destroy bacteria, viruses, mold, mildew, and odors.For timed operation, turn the dial clockwise to select up to 12 hours of run time. Turn on the power with the large brown knob and adjust the output from 500 to 8000 milligrams per hour. At the end of the elapsed time, the ozone will shut off but the fan will remain running to help the ozone dissipate and turn back into oxygen. The fan will stop when the power is turned off. If stubborn odors persist, repeat the process.Due to its high output, do not use the PRO-8 in areas occupied by people or animals. The PRO-8 is also an ideal choice for treating mildew in damp crawl spaces.The ceramic plates inside the ozone generator should be cleaned with soap and water whenever there is a noticeable drop in ozone output. The housing is made completely from stainless steel for maximum durability.Stainless Steel10,000 sq. ft for odors, 2000 sq.ft. for mold120 V AC, 1200 watts, 3 Amp FusedAdjusts from 500 to 8000 milligrams per hourHold ( for continuous operation) or timed from 15 min. to 12 hoursRegisters usage up to 99,999 hours11" L x 15" W x 10" H25 lbs.
Jenesco PRO-4 Industrial Ozone Generator
The Jenesco PRO-4 ozone generator is designed for use in commercial applications or wherever high ozone output is needed to neutralize stubborn odors in automobiles, limousines, buses, recreational vehicles, rental cars, vans, and boats.
It is also excellent for use in hotel and motel rooms, apartments, and extended-stay facilities. The PRO-4's high output gets the job done quickly and thoroughly. In just a few hours, ozone permanently kills odors from such sources as cigarettes and other tobacco products, smoke damage, chemical and cleaning fumes, decaying matter, pets, urine, food, beverages, vomit, mold and mildew. Auto detailers have reported their ozone generators have paid for themselves in the first week or two.
For best results place the PRO-4 on the vehicle's dashboard and run an extension cord through the window to the nearest AC outlet. Turning on the heating or air conditioning system allows the duct work to be cleaned in the process. When treating motel rooms or apartments set the PRO-4 on a shelf, refrigerator or stepladder; ozone is heavier than air so it will migrate to the floor. A quick ozone shock treatment of a vacant rental can be a real cost saver. It can turn a smoking room into non-smoking, and permanently eliminate cleaning, painting and pet odors.
Easy Operation
For continuous operation, turn the timer knob counter clockwise to the Hold position. For timed operation, turn the dial clockwise to select up to 12 hours of run time. Switch on the PRO-4 and adjust the round dial to the preferred output level. Fully clockwise gives the maximum output. Stay out of the room or vehicle during this treatment. At the end of the elapsed time open all doors and windows and let the ozone dissipate. If stubborn odors persist, repeat the process. Operate only on low when deodorizing a home, shop or office that is occupied by people or animals.
Maintenance
A small input filter is supplied with every unit and simply needs to be washed occasionally. The ceramic plates inside the ozone generator should be cleaned with soap and water every two months or whenever there is a noticeable drop in ozone output. The plates need to be replaced every two years or when the output no longer recovers to the original level after cleaning. The housing is made completely from stainless steel for maximum durability.
Specifications
Note: Does not meet California air cleaner regulation requirements (AB2276): Cannot be shipped to California If you would like to purchase one of our ozone generators in California for an industrial application like mold and mildew remediation or odor removal in unoccupied spaces, please contact us for additional requirements to purchase.
For more information, please visit 2g/h Portable Ozone Generator.